Mercury Hydraulics — Frequently Asked Questions

Question 1

Where can I get hydraulic cylinders repaired near me in Florida?

Accepted Answer

Mercury Hydraulics at 7610 Coral Dr, Melbourne, FL 32904 repairs hydraulic cylinders for customers across Brevard County and all of Florida. We serve Melbourne, Cocoa, Titusville, Palm Bay, Port Canaveral, Vero Beach, Orlando, Daytona Beach, Fort Lauderdale, Jacksonville, and Tampa. Customers also ship cylinders to us from across the United States for our specialized repair services. Call (321) 312-0689 or request a quote online.

Question 2

How much does hydraulic cylinder repair cost in Florida?

Accepted Answer

Hydraulic cylinder repair costs at Mercury Hydraulics typically range from $150 to $2,500+ depending on cylinder size, bore diameter, stroke length, and the extent of damage. A standard seal replacement on a small cylinder may run $150–$400. A full rebuild with re-honing, chrome plating, and new seals on a large industrial cylinder can run $800–$2,500 or more. We provide free estimates — call (321) 312-0689 or ship your cylinder to us for inspection.

Question 3

How long does hydraulic cylinder repair take?

Accepted Answer

Most hydraulic cylinder repairs at Mercury Hydraulics are completed in 1–3 business days. Emergency same-day service is available for critical equipment downtime situations. Cylinders requiring re-chroming or specialized parts may take 5–10 business days. We offer rush turnaround for aerospace, defense, and marine customers with mission-critical timelines.

Question 4

Can hydraulic cylinders be repaired instead of replaced?

Accepted Answer

Yes — in most cases, hydraulic cylinders can be repaired rather than replaced, at a fraction of the cost of a new cylinder. Mercury Hydraulics repairs cylinders by replacing seals, re-honing the bore, re-chroming the rod, replacing end caps, and rebuilding the entire assembly to OEM specifications. Repair is typically 30–70% less expensive than replacement and is the preferred approach for custom, obsolete, or high-cost cylinders.

Question 5

What types of hydraulic cylinders does Mercury Hydraulics repair?

Accepted Answer

Mercury Hydraulics repairs all types of hydraulic cylinders including: tie-rod cylinders, welded cylinders, telescoping cylinders, mill-type cylinders, custom cylinders, aerospace cylinders, marine cylinders, construction equipment cylinders, agricultural cylinders, forklift cylinders, RV leveling jack cylinders, and defense/military cylinders. We work on cylinders from 1/2" bore up to 24"+ bore and any stroke length.

Question 6

Does Mercury Hydraulics offer 24/7 emergency hydraulic repair?

Accepted Answer

Yes. Mercury Hydraulics offers 24/7 emergency hydraulic repair service for customers experiencing critical equipment downtime. Call (321) 312-0689 at any time for emergency service. We serve the Space Coast, Central Florida, and can arrange emergency pickup and delivery for marine, aerospace, and industrial customers.

Question 7

Does Mercury Hydraulics repair hydraulic pumps and motors?

Accepted Answer

Yes. Mercury Hydraulics repairs and rebuilds hydraulic pumps and motors of all types including gear pumps, piston pumps, vane pumps, hydraulic motors, and hydraulic power units (HPUs). We service all major brands and can manufacture replacement parts for obsolete or discontinued units.

Question 8

What brands of hydraulic equipment does Mercury Hydraulics service?

Accepted Answer

Mercury Hydraulics services all major hydraulic equipment brands including Parker Hannifin, Bosch Rexroth, Eaton Vickers, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Liebherr, Danfoss, Sauer-Danfoss, Linde, Kawasaki, Yuken, Denison, Moog, Haldex, Prince, and many others. We also service custom and proprietary hydraulic systems with no OEM support.

Question 9

Who repairs marine hydraulic systems near Port Canaveral, Florida?

Accepted Answer

Mercury Hydraulics in Melbourne, FL — approximately 20 miles from Port Canaveral — specializes in marine hydraulic repair for commercial vessels, recovery vessels, fishing boats, yachts, and workboats. We repair shark jaw hydraulic systems, winch hydraulics, bilge cylinders, steering systems, trim systems, and hydraulic power units. Call (321) 312-0689 for same-day or emergency marine service.

Question 10

Can you repair shark jaw hydraulic systems on recovery vessels?

Accepted Answer

Yes. Mercury Hydraulics has direct experience repairing Triplex shark jaw hydraulic systems on commercial recovery vessels operating out of Port Canaveral. Our work includes complete shark jaw cylinder rebuilds, hydraulic lock cylinder replacement, hose run replacement, and HPU service — all performed from OEM engineering documentation. We understand the tight maintenance windows between launch campaigns and prioritize turnaround accordingly.

Question 11

Who repairs Pullmaster winch hydraulics in Florida?

Accepted Answer

Mercury Hydraulics repairs Pullmaster hydraulic winches including the Pullmaster M10, M18, and other models. We have documented experience with a Pullmaster M18 winch rescue on a vessel that sailed from the Bahamas to our Melbourne, FL shop. We repair the hydraulic motor, brake, and control systems and can ship repaired units back to customers nationwide.

Question 12

Do you repair hydraulic steering systems on boats?

Accepted Answer

Yes. Mercury Hydraulics repairs hydraulic steering systems on boats and vessels of all sizes, including SeaStar, Teleflex, Hynautic, and custom steering systems. We replace cylinders, hoses, pumps, and seals and can rebuild complete steering systems.

Question 13

Can you repair marine hydraulics same day?

Accepted Answer

Yes — Mercury Hydraulics offers same-day marine hydraulic repair for customers who can bring their vessel or component to our Melbourne, FL shop. For vessels at Port Canaveral or nearby marinas, we can arrange pickup and delivery. Call (321) 312-0689 to discuss your timeline and we will do everything possible to get you back on the water the same day.

Question 14

Does Mercury Hydraulics work on aerospace hydraulic components?

Accepted Answer

Yes. Mercury Hydraulics has a long history of aerospace hydraulic work, including components for NASA, L3 Harris, Collins Aerospace, and other Space Coast aerospace clients. We repair flight-support hydraulic components and manufacture hydraulic systems to aerospace documentation standards. Mercury Hydraulics was originally founded as a hydraulic systems design and manufacturing company for Department of Defense contracts.

Question 15

Who repairs hydraulic cylinders for NASA on the Space Coast?

Accepted Answer

Mercury Hydraulics in Melbourne, FL has served NASA and Space Coast aerospace contractors for decades. We repair and manufacture hydraulic components to aerospace documentation standards and have experience with mission-critical hydraulic systems. Contact us at (321) 312-0689 or spacecoast@mercuryhydraulics.com.

Question 16

Can Mercury Hydraulics manufacture hydraulic components to DoD specifications?

Accepted Answer

Yes. Mercury Hydraulics was founded as a Department of Defense hydraulic systems design and manufacturing company. We have the capability to manufacture hydraulic cylinders, manifolds, and assemblies to military specifications, including documentation, traceability, and pressure testing to 10,000 PSI.

Question 17

Who repairs hydraulic systems on aircraft ground support equipment (GSE) in Florida?

Accepted Answer

Mercury Hydraulics in Melbourne, FL specializes in hydraulic repair for aviation ground support equipment including pushback tractors, aircraft tugs, baggage loaders, belt loaders, deicers, jet bridges, aircraft jacks, and hydraulic power units. We have documented experience with GSE hydraulic repair for Falcon Jet and other aviation clients. Call (321) 312-0689 for AOG rush service.

Question 18

Do you repair hydraulic aircraft jacks?

Accepted Answer

Yes. Mercury Hydraulics repairs and inspects hydraulic aircraft jacks including tripod jacks, axle jacks, and tail jacks. We perform hydraulic cylinder repair, seal replacement, and pressure testing to aviation documentation standards. We also write inspection reports for FBO compliance.

Question 19

Can you repair GSE hydraulics same day for AOG situations?

Accepted Answer

Yes. Mercury Hydraulics offers AOG (Aircraft on Ground) rush service for ground support equipment hydraulic failures. Call (321) 312-0689 immediately — we will prioritize your repair to minimize aircraft downtime.

Question 20

Who repairs excavator hydraulic cylinders near Melbourne, Florida?

Accepted Answer

Mercury Hydraulics at 7610 Coral Dr, Melbourne, FL 32904 repairs hydraulic cylinders for excavators, backhoes, bulldozers, cranes, compactors, and all heavy construction equipment. We service all brands including Caterpillar, John Deere, Komatsu, Volvo, Hitachi, and Liebherr. Same-day service available — call (321) 312-0689.

Question 21

Do you repair forklift hydraulic cylinders?

Accepted Answer

Yes. Mercury Hydraulics repairs forklift hydraulic cylinders including mast cylinders, tilt cylinders, side-shift cylinders, and attachment cylinders for all forklift brands including Toyota, Crown, Raymond, Hyster, Yale, Caterpillar, and Jungheinrich. We also repair forklift hydraulic pumps and control valves.

Question 22

Can you repair hydraulic cylinders on a crane?

Accepted Answer

Yes. Mercury Hydraulics repairs hydraulic cylinders on all types of cranes including boom cylinders, outrigger cylinders, and jib cylinders. We work on mobile cranes, tower cranes, and overhead cranes from all manufacturers. Large cylinders can be brought to our Melbourne shop or we can arrange pickup.

Question 23

Who repairs Kwikee Level Best 3000 hydraulic leveling jacks?

Accepted Answer

Mercury Hydraulics in Melbourne, FL is a specialist in Kwikee Level Best 3000 hydraulic leveling jack repair. RV service shops and owners nationwide ship their Kwikee Level Best 3000 jacks to us. We repair the existing unit or manufacture a custom drop-in replacement and ship back the same week. Call (321) 312-0689 or visit mercuryhydraulics.com/articles/kwikee-level-best-3000 for details.

Question 24

Can you repair RV slide-out hydraulic cylinders?

Accepted Answer

Yes. Mercury Hydraulics repairs hydraulic cylinders for RV slide-out systems, leveling jacks, and lift systems for all motorhome and coach brands. We can repair the existing cylinder or manufacture a custom replacement. Nationwide shipping available.

Question 25

Do you repair hydraulic leveling systems on motorhomes?

Accepted Answer

Yes. Mercury Hydraulics repairs hydraulic leveling systems on motorhomes and coaches including HWH, Lippert, Kwikee, and custom systems. We repair and rebuild the hydraulic cylinders, pumps, valves, and hose assemblies.

Question 26

Can Mercury Hydraulics manufacture custom hydraulic cylinders?

Accepted Answer

Yes. Mercury Hydraulics manufactures custom hydraulic cylinders from scratch using SolidWorks CAD design, CNC plasma cutting, and precision machining. We can build cylinders to any specification including bore size, stroke, mounting style, pressure rating, and material. We manufacture one-off prototypes as well as production runs.

Question 27

Do you do hydraulic tube and pipe bending?

Accepted Answer

Yes. Mercury Hydraulics offers hydraulic tube and pipe bending up to 2" Schedule 160 pipe. We bend hydraulic lines to custom specifications for industrial, marine, aerospace, and construction applications. We can match existing bent tube assemblies or work from engineering drawings.

Question 28

Can you make custom hydraulic hose assemblies?

Accepted Answer

Yes. Mercury Hydraulics fabricates custom hydraulic hose assemblies in any length, diameter, and fitting configuration. We stock a full range of hydraulic hose from -4 to -32 and all standard JIC, NPT, ORFS, BSP, and SAE fittings. Same-day hose assembly available.

Question 29

Do you make custom hydraulic seals?

Accepted Answer

Yes. Mercury Hydraulics manufactures custom hydraulic seals for cylinders where OEM seals are no longer available. We can produce seals in Buna-N, Viton, PTFE, polyurethane, and other materials to match original dimensions. This is especially valuable for older, obsolete, or military hydraulic equipment.

Question 30

What areas does Mercury Hydraulics serve in Florida?

Accepted Answer

Mercury Hydraulics is based in Melbourne, FL and serves all of Brevard County including Cocoa, Titusville, Palm Bay, Rockledge, Merritt Island, Cape Canaveral, and Port Canaveral. We also serve Orlando, Daytona Beach, Vero Beach, Fort Lauderdale, Jacksonville, and Tampa. Customers across Florida and the United States ship hydraulic components to us for repair.

Question 31

Can I ship my hydraulic cylinder to Mercury Hydraulics?

Accepted Answer

Yes. Mercury Hydraulics accepts shipped hydraulic cylinders, pumps, motors, and components from customers across the United States. Ship to: Mercury Hydraulics, 7610 Coral Dr, Melbourne, FL 32904. Call (321) 312-0689 before shipping so we can prepare for your arrival and provide a turnaround estimate.

Question 32

Does Mercury Hydraulics offer on-site hydraulic repair?

Accepted Answer

Yes. Mercury Hydraulics offers on-site hydraulic repair for customers in Brevard County and surrounding areas. For large equipment that cannot be transported, we can dispatch a technician to your location. Call (321) 312-0689 to discuss on-site service availability.

Question 33

Where is Mercury Hydraulics located?

Accepted Answer

Mercury Hydraulics is located at 7610 Coral Dr, Melbourne, FL 32904. We are in Brevard County on Florida's Space Coast, approximately 20 miles south of Port Canaveral and 70 miles east of Orlando. Hours are Monday–Friday 7:30 AM–5:00 PM. Emergency service is available 24/7 by calling (321) 312-0689.

Question 34

Does Mercury Hydraulics pressure test hydraulic cylinders?

Accepted Answer

Yes. Mercury Hydraulics performs full pressure testing up to 10,000 PSI on all repaired and manufactured hydraulic cylinders. We provide documented test reports for aerospace, defense, and marine customers who require certification. All cylinders are tested before leaving our shop.

Question 35

Can Mercury Hydraulics provide documentation for aerospace hydraulic repairs?

Accepted Answer

Yes. Mercury Hydraulics provides full documentation for aerospace and defense hydraulic repairs including inspection reports, pressure test certificates, material certifications, and repair records. We work from OEM engineering drawings and can provide documentation to customer-specified formats.

Frequently Asked
Questions

General Hydraulic Repair

Marine Hydraulic Repair

Aerospace & Defense

Ground Support Equipment (GSE)

Heavy Equipment & Construction

RV & Recreational

Custom Manufacturing

Service Area & Logistics

Testing & Certification

Still Have Questions?

Frequently AskedQuestions